Preparing to Send a Fax 7-2Sending Faxes7Set the resolution as follows:1 Press [FAX].If you are already in the Fax standby mode, you can skip this step.2 Press [Image Quality].The LCD display shows the current resolution setting.3 Press [Image Quality] repeatedly until the resolution you want is displayed ➞ press [OK].4 Continue with the operation you wish to complete.If you do not proceed with any other operation, the LCD display returns to standby mode after about 5 seconds.Adjusting the Exposure (Density)You can adjust the lightness/darkness of the document pages before you scan for sending.You can select the scanning density from the following:• for documents with dark text or color.• for normal printed or type written text.• for documents with light text or color.1 Press [FAX].If you are already in the Fax standby mode, you can skip this step.2 Press [Exposure].The LCD displays the current exposure setting.3 Press [Exposure] repeatedly until the scanning density you want is displayed ➞ press [OK].4 Continue with the operation you wish to complete.If you do not proceed with any other operation, the LCD display returns to standby mode after about 5 seconds.FAX RESOLUTIONSTANDARD ➞ 31/12/2003 WED 10:00FaxOnly STANDARDDENSITY CONTROLSTANDARD ➞ 31/12/2003 WED 10:00FaxOnly STANDARD
