Different Ways to Receive a Fax8-2Receiving Faxes8Setting the Receive ModeSet the machine receive mode as follows:1 Open One-Touch Speed Dial panel ➞ press [Receive Mode].The LCD display shows the current receive mode setting.2 If you want to change the receive mode, press [Receive Mode] repeatedly until the mode you wantappears ➞ press [OK].Each time you press [Receive Mode], the receive mode changes in the following order:FaxOnly ➞ Manual ➞ AnsMode ➞ FaxTel ➞ FaxOnly ➞ …Receiving Faxes and Phone Calls Automatically: FaxTelModeSet this mode if you want your machine to automatically switch between voice and fax calls.You can control precisely how your machine handles incoming calls by adjusting the settings describedbelow.Setting the Options for FaxTel ModeWhen you select FaxTel Mode from the Menu, you can also set the following options.■ RING START TIMEWhen a call comes in, the machine checks to see if it is a person wishing to speak to you or a fax machine trying tosend a document. If your machine does not have enough time to detect the fax tone, it assumes the call is from atelephone. Use the setting to increase the time the machine takes to check whether a call isfrom a fax machine or a telephone. You can select a time between 0 and 30 seconds; the default is 8 seconds.■ F/T RING TIMEWhen your machine is set to receive both fax and telephone calls automatically, the telephone rings to alert you topick up the handset if the call is from a person. If you do not pick up the handset within a certain amount of time, thetelephone stops ringing. Use this option to change the number of times the machine rings, from 10 to 60 seconds.The default is 22 seconds.
