Canon GX3000 Series Online Manual

Also see for GX3000 Series: Getting started Online manual

Printing on Postcards1. Load postcard on the printer1.2. Open the printer driver setup window2.3. Select commonly used settings3.Display the Basic Settings tab, and for Profiles, select Standard.4. Select the paper size4.For Printer Paper Size, select Hagaki 100x148mm or Hagaki 2 200x148mm.Important• Return postcards can be used only when you print them from the computer.• When printing a return postcard, always set the paper size to Hagaki 2 200x148mm from yourapplication software or the printer driver.• Do not fold the return postcard. If a crease is formed, the printer will not be able to feed thepostcard properly, and this condition will cause line shifts or a paper jam.5. Select the media type5.Select the Hagaki you want to use from Hagaki in Media Type.Important• This printer cannot print on postcards that have photos or stickers attached.• When you use the automatic duplex printing function to print a postcard, print the address sidefirst and then print the message side.• When printing on each side of a postcard separately, you will get cleaner printing if you print themessage side first and then print the address side.• The paper settings on the printer driver are different, depending on whether you are printing onthe address side or the message side.For details about the paper information to be registered to the printer driver and on the printer, seethe following:Paper Settings on the Printer Driver and the Printer (Media Type)Paper Settings on the Printer Driver and the Printer (Paper Size)• When you use the automatic duplex printing function, register the paper information for the side tobe printed first.6. Set the print orientation6.To print the address horizontally, set Orientation to Landscape.7. Select the print quality7.For Quality, select the quality according to your purpose.8. Click OK8.256