Canon GX3000 Series Online Manual

Also see for GX3000 Series: Getting started Online manual

Checking Communication Between the Computer, the Printer, and theWireless RouterPerform a ping test to check if communication is taking place.• For Windows:•1. Select Command Prompt from Start.1.2. Type the ping command and press Enter.2.The ping command is as follows: ping XXX.XXX.XXX.XXX"XXX.XXX.XXX.XXX" is the IP address of the target device.If communication is taking place, a message like the one shown below appears.Reply from XXX.XXX.XXX.XXX: bytes=32 time=10ms TTL=255If Request timed out appears, communication is not taking place.• For macOS:•1. Start Network Utility as shown below.1.Select Computer from Go menu of Finder, double-click Macintosh HD > System > Library >CoreServices > Applications > Network Utility.2. Click Ping.2.3. Make sure Send only XX pings (XX are numbers) is selected.3.4. Enter IP address of target printer or target wireless router in Enter the network4.address to ping.5. Click Ping.5."XXX.XXX.XXX.XXX" is the IP address of the target device.A message such as the following appears.64 bytes from XXX.XXX.XXX.XXX: icmp_seq=0 ttl=64 time=3.394 ms64 bytes from XXX.XXX.XXX.XXX: icmp_seq=1 ttl=64 time=1.786 ms64 bytes from XXX.XXX.XXX.XXX: icmp_seq=2 ttl=64 time=1.739 ms--- XXX.XXX.XXX.XXX ping statistics ---3 packets transmitted, 3 packets received, 0% packet lossIf "100% packet loss" appears, communication is not taking place. Otherwise, computer iscommunicating with target device.400