35TroubleshootingLet’s take a look at countermeasures against the troubles that may occur during use of the printer.zzzz “An Error Message is Displayed on the Operation Panel” on page 35zzzz “Ink does not come out/ Printing is Blurred/ Colors are Wrong/ White Streaks” on page 37zzzz “Cannot Print Properly from the Digital Camera” on page 38zzzz “An Error Message is Displayed While Using the Photo Viewer” on page 39An Error Message is Displayed on the Operation Panel An Error Number is Displayed.If an error number is displayed on the operation panel, take the corresponding countermeasure describedbelow.Here, we will discuss errors indicated on the operation panel, problems that might occur during directprinting from the digital camera, and problems that are also likely to occur while using the PhotoViewer. If you cannot find the symptom corresponding to a certain problem, refer to the User’sGuide.Error Number/Problem Try This102The paper thickness leverposition is wrong.Setting the paper thickness lever at the correct position will startprinting.Pressing the Cancel button will stop printing.202The waste ink tank isalmost full.Press the Resume button to recover from the error.You can print images for a while but you cannot print any more imagewhen the waste ink tank becomes full. Contact a Canon servicerepresentative.301There is no paper or papercannot be fed.Load paper and press the Resume button.302Paper jammed.Remove the jammed paper, load paper, and press the Resume button.402No print head is installed.Install the print head following the instructions given in the Quick StartGuide.Error number