Canon I470D - i Color Inkjet Printer Printing Manual

36 An Error Icon is Displayed on the Operation Panel.403The print head is faulty.Turn off the printer by pressing the Power button, then turn on theprinter again.If the same error persists, the print head may be faulty. Contact aCanon service representative.611A specified period of timehas lapsed withoutreceiving a response fromthe digital camera.Press the Resume button.The digital camera will automatically turn on. If not, turn it on.612This printer is not ready forthe connected digitalcamera or digital videocamcorder.Disconnect the camera connection cable, press the Resume button,and then connect the cable once more.If the error is still unresolved, there is a possibility that you are using adigital camera or digital video camcorder that is not supported by thisprinter.Connect a Canon “Bubble Jet Direct” compatible digital cameras ordigital video camcorders.802/804/806/807/808/809An error requiring aservice may haveoccurred.Turn off the printer, remove the power cord plug from the outlet, plugthe power cord back in, and then turn on the printer again.If the same error persists, contact a Canon service representative.If the Same Error PersistsIf the same error persists after a countermeasure is taken according to the above error number, turnoff the printer, remove the power cord plug from the outlet, plug the power cord back in, and thenturn on the printer again.Error Icon/Problem Try Thisstays lit.The memory card isinserted incorrectly.Insert an available memory card after checking its orientation. See“Using a Memory Card” on page 6.If a memory card has already been inserted, remove it and then insertit again. Next, check that the Indicator lamp stays on.Never remove the card while image data is being read (the Indicatorlamp is flashing).is flashing.The memory card cannotbe read.Image data edited/processed on the computer must also be printedfrom the computer.The ? mark is displayedbeside the ink tank icon.An ink counter has notbeen reset afterreplacement of therelevant ink tank.After replacing an ink tank with a new one, reset the relevant inkcounter. See “Replacing an Ink Tank” on page 31.Error Number/Problem Try This