Sending Document Data to the Image Server 3-253 Using the Print OptionsSending Document Data to the Image ServerDocument data can be sent to the Mail Box (Available for imageRUNNER 6000/5000, iR3250, imag-eRUNNER 600/550/60 and imageRUNNER 400/330) or registered as an Image Form (Available forimageRUNNER 600/550/60).To send a document to the Mail Box1 Select Store from the drop-down list box at the upper right in either the Page Setup, Fin-ishing, Paper Source or Quality sheet.3 Specify the name of the data to send to the Mail Box, and then specify the Box Number ofthe Mail Box.NOTE• For imageRUNNER 6000/5000 and imageRUNNER 600/550/60, clicking the Proof Print check boxprints a copy of the document at the same time as sending the document to the Mail Box.4 Click the OK button.NOTE• For imageRUNNER 400/330, the Mail Box option is available only when the extended memory is installedin the printer.• For imageRUNNER 400/330, you must first select the Enable Mail Box check box in the Configurationsheet (Windows 95/98) or the Device Settings sheet (Windows NT4.0/2000).• The Mail Box name can be acquired by clicking the Get Device Status button in the Configuration sheet(Windows 95/98) or the Device Settings Sheet (Windows NT4.0/2000).2 Click the Yes button in the messagebox, or click the Store Destination iconbutton to open the Store Destinationdialog box.
