Canon ImagePress C800 Quick Start Manual

36SpecificationsSpecifications are subject to change without notice for product improvement or future release.For more information on the specifications of the following optional equipment, consult the relevant guide.• High Capacity Stacker-G1• Booklet Trimmer-D1• Two-Knife Booklet Trimmer-A1• Perfect Binder-D1• Professional Puncher-B1▀ Main UnitItem SpecificationsName Canon imagePRESS C800/C700/C60Type Reader-Printer Separated, Console typeColor Supported Full ColorResolution for Writing 2,400 dpi x 2,400 dpiPaper Weight/Type Paper Drawer 1, 2, 3:Weight:14 lb bond to 80 lb cover (52 g/m2 to 220 g/m2 )Type:Thin 2 (14 lb bond to 16 lb bond (52 g/m2 to 63 g/m2 )), Thin 1 (17 lb bond to 20 lbbond (64 g/m 2 to 79 g/m 2 )), Plain 1 (20 lb bond to 24 lb bond (80 g/m2 to 90 g/m 2 )),Plain 2 (25 lb bond to 28 lb bond (91 g/m 2 to 105 g/m2)), Heavy 1 (29 lb bond to 34lb bond (106 g/m2 to 128 g/m2 )), Heavy 2 (35 lb bond to 40 lb bond (129 g/m2 to 150g/m 2)), Heavy 3 (40 lb bond to 66 lb cover (151 g/m 2 to 180 g/m 2 )), Heavy 4 (67 lb coverto 80 lb cover (181 g/m2 to 220 g/m2 )), Color, Recycled, Pre-Punched, Transparency,Clear Film, Tab, Bond, Letterhead, Textured *1 , Vellum, and Envelopes* The printing conditions may vary, depending on the paper type. For more information on paper types, seee-Manual > Basic Operations.*1 Textured paper that is 221 g/m2 or more in weight cannot be used.Paper Sizes Paper Drawer 1, 2, 3:13" x 19", 12 5/8" x 17 11/16", 12" x 18", 11" x 17", LGL, LTR, LTRR, EXEC, STMTR, CustomSize (4" x 5 7/8" to 13" x 19 1/4" (100 mm x 148 mm to 330.2 mm x 487.7 mm)), andEnvelopes*1 *2*1 The following envelope types can be used:Standard Paper Size : Nagagata 3, Yougatanaga 3, Kakugata 2, No. 10(COM10), ISO-C5, DL, and MonarchCustom Paper Size : 6" x 9", 9" x 12", and 10" x 13"Envelopes whose size is between 4" x 5 7/8" to 13" x 19 1/4" (100 mm x 148 mm to 330.2 mmx 487.7 mm) can also be fed, however, image may not be printed correctly on the envelops.* 2 The following envelope types can be used without the Envelope Feeder Attachment-F1.Kakugata 2, ISO-C5, 9" x 12", and 10" x 13"Warm-Up Time After powering ON6 minutesIf [Quick Startup Settings for Main Power] is set to 'On', it takes 7 seconds until the keyoperation on the touch panel display is available after turning ON the main power of themachine. Depending on the situations, the machine does not startup quickly.Returning from the Sleep mode6 minutes* At a room temperature of 68°F in all above cases.* Activation time may vary, depending on the environment and conditions under which the machine is being used.