| 
33Receiving FaxesENGLISH6 Press [Stop].Setting ends and the fax returns to standby mode. Receiving to Memory TemporarilyYou can enable memory receiving feature temporarily.1 Press [ON/OFF] to select .z The fax starts receiving documents in memory.z To cancel, press [ON/OFF] again. Changing Calling Volume1 Press [Menu].2 Use []] or [_] to select , then press [Start].3 Use []] or [_] to select , then press [Start].4 Use []] or [_] to select , then press [Start].5 Use []] or [_] to select , then press [Start].6 Use []] or [_] to change the volume, then press [Start].7 Press [Stop].Setting ends and the fax returns to standby mode. Receiving Documents in Memory While Performing Another Task orWhen a Problem OccursIf your fax is performing another task or encounters a problem when receiving a document, itautomatically stores the unprinted pages in memory, and the LCD displays MEMORY> as well as one or more messages. For an explanation of the message(s) and detailson the action to take, see page 77. Polling to Receive DocumentsThe polling feature allows you to request a document to be faxed to you from another faxmachine. The sending party only needs to make sure the document is on a fax machine andready to be sent. Thus, when your fax polls the other fax machine, the document is sentautomatically. The fax can poll any fax machine that supports polling.1 Press [Menu].2 Use []] or [_] to select , then press [Start].3 Use []] or [_] to select , then press [Start].NoteOnce the pages are printed, they are deleted from memory.Notez Before attempting to poll a fax machine, make sure that the other fax machine supports polling.z Your fax cannot do polling transmissions. |
