aking Copies11Reserve CopyThis feature allows you to reserve the next job while the machine is printing out a current job.1Load the document to be reserved in the ADF.For details on how to load documents, see “Loading Documents in the ADF,” on p. 6-3.2Use the numeric buttons to enter the number of copies.You can set up to 99 copies.3Adjust any necessary settings for your document.•Press [Image Quality] to select the scanning resolution. (See “Adjusting the Image Quality (Resolution),” onp.11-6.)•Press [Exposure] to select the scanning exposure. (See “Adjusting the Exposure (Density),” on p. 11-6.)•Press [Enlarge/Reduce] to select the copy ratio. (See “Setting Enlarging/Reducing,” on p. 11-4.)4Press [Start].The machine begins scanning.NOTE•After printing of the current copy job is complete, the next copy job begins.•If the memory becomes full while scanning, appears in the LCD. When the ADF is used forscanning, the document being scanned stops in the ADF.All of the scanned documents will be erased if appears, so divide the document and copy eachpart separately, or select a lower image quality mode and make copies again.•If the available memory decreases, and are displayed alternatively.If memory space becomes available, the scanning begins again automatically. Also, check that the cassette is notempty.
