Canon LEGRIA HFR16 Instruction Manual

Also see for HFR17: Instruction manual

Contents

142 Additional InformationIndicators and Onscreen Displayslights up in red.- Battery pack is exhausted. Replace or charge the battery pack.lights up in red.- A memory card error occurred. Turn off the camcorder. Remove and reinsert the memorycard. Initialize the memory card if the display does not change back to normal.- The memory card is full. Replace the memory card or delete some recordings ( 50, 83) tofree some space on the memory card.Even after stopping recording, the ACCESS indicator does not go off.- The scene is being recorded in the memory. This is not a malfunction.The red ON/OFF (CHG) indicator flashes rapidly ( one flash at 0.5-secondintervals).- Charging has stopped because the compact power adapter or the battery pack is faulty. Con-sult a Canon Service Center.The red ON/OFF (CHG) indicator flashes ( two flashes at 1-secondintervals)- The remaining charge of the battery pack is at least 50% of a full charge. This is not a mal-function.The red ON/OFF (CHG) indicator flashes very slowly ( one flash at 2-second intervals).- The temperature of the battery pack is outside the charging range. If the battery pack’s tem-perature is below 0 °C, warm it before charging it; if it is above 40 °C, let the battery packcool down before charging it.- Charge the battery pack in temperatures between 0 °C and 40 °C.- The battery pack is damaged. Use a different battery pack.appears on the screen.- The LOCK switch on the Eye-Fi card is set to prevent accidental erasure. Change the positionof the LOCK switch.- Data could not be read from the Eye-Fi card. Turn off the camcorder and turn it on again. If theproblem persists, it may indicate a problem with the Eye-Fi card. Contact the card manufac-turer’s customer care.Picture and SoundThe screen appears too dark.- The LCD screen was dimmed. Hold pressed for 2 seconds to restore the LCD screento its previous brightness setting.DISP.