152 Additional InformationCannot read the disc. Check the disc.- During disc recording mode, this message can appear when a commercially available DVDdisc (a DVD disc containing movies, software, etc.) or an 8 cm mini DVD disc is inserted.Replace with a brand new disc.- During disc playback mode, this message can appear when a commercially available DVDdisc or a brand new DVD disc is inserted. Replace with an AVCHD disc created with the DVDburner.Close the memory card slot cover- The memory card slot cover is open. Close the cover after correctly inserting the memorycard.Connect the compact power adapter- The camcorder is being powered by the battery pack. Connect the compact power adapter tothe camcorder.Disc access failure. Check the disc.- There was an error when reading the disc or attempting to write onto it.- This message can appear also if condensation has formed ( 159). Wait until the DVDburner dries completely before resuming use.- The disc may be dirty or not correctly loaded. Try removing the disc and reinserting it aftercleaning the recording surface with a clean, soft cloth. If the problem persists, replace with adifferent disc.Error reading the data- Check that the USB cable was not accidentally disconnected.No disc- Insert a disc into the DVD burner.- This message can appear also if condensation has formed ( 159). Wait until the DVDburner dries completely before resuming use.No photos- There are no photos to add to the disc.No scenes- There are no scenes to add to the disc.Operation canceled- The USB cable was disconnected and the operation was canceled. Check the USB connection.Unable to recover data- Could not recover a corrupted file. Save your recordings ( 104) and initialize the memoryusing the [Complete Initialization] option ( 35).
