6. SETTING-UP THE PROJECTOR6.1 Positioning the projectorThis projector is designed to project on a flat projection surface.The projector can be focused from 1.4m (4.6') to 8.0m (26.3').Refer to the figure below to adjust the screen size.6.2 Installation precautions1) Temperature of air discharged from exhaust ventHot air is discharged from the exhaust vent. Do not put the object in the way of thishot air.2) Installation siteDo not install the projector in humid or duty locations, or locations subject to a lot ofoil mist or cigarette smoke. Doing so may cause dirt to adhere to the lenses, mirrorsand other optical parts, resulting in impaired image quality. Also, do not install theprojector in high- or low-temperature locations.3) Operating temperature range: 5˚C to 35˚C4) Storage temperature range: –10˚C to 60˚C5) CondensationDo not move the projector suddenly from a low-temperature location to a high-temperature location, or suddenly raise the room temperature. Doing so can causemoisture in the air to condense on the lenses and mirrors of the projector, resultingPart 1: General Information1-17H1H2200”167”150”125”100”83”60”50”36”8.0m6.0m4.0m2.4m1.4m30”WIDE ENDTELE ENDScreen Size(W x H) mmHeight (H1)30”Height (H2)610 x 457422mm35mm60”1219 x 914844mm70mm100”2032 x 15241407mm117mm150”3048 x 22862110mm176mm200”4064 x 30482814mm234mmFig. 1-12
