1.2 Service Adjustment Menu OperationTo enter the service modeTo enter to the “Service Mode”, press and hold the MENU and NORMAL button onthe projector at the same time for more than 3 seconds. The service mode displayappears on the screen as follows.To adjust service dataSelect the adjustment item no. by pressing the pointer or button, and changethe data value by pressing the pointer or button. Refer to the “Service AdjustmentData Table” for further description of adjustment item no. and data value.To return to the normal modeTo exit the service mode, press the POWER button on the projector or remote controlunit.Part 3: Adjustment3-3Service Mode10 15VideoVersion : 1.0Item Data10 15Normal mode Service modeAdjustmentItem No.AdjustmentData ValueItem DataWIDE TELEPOWER MENUMODENORMALLAMPREPLACEWARNINGTEMP. READY LAMPFig. 3-1
