3.3 Relay Lens Adjustment[Before adjustment]• Adjustment requires a 2.0mm hex driver and a slot screwdriver.• Remove cabinet top following to “Mechanical Disassemblies”.[Adjustment]1. Turn on lamp by a state of without FPCcable of LCD panels.2. Adjust the adjustment base of relay lensass’y to make color uniformity in white.If the color shade appears on the left or rightof the screen as shown in Fig.3-15, loosen ascrew A with the 2.0mm hex driver andadjust the slot B to make color uniformity inwhite by using a slot screwdriver.3. Tighten the 1 screw A to fix the relay lensunit.Part 3: Adjustment3-19Fig. 3-15CAUTION Do not disconnect the connectors on main and component boardsotherwise the projector can not be turned on.ASlot BabbMoving of slot BaWhite
