Canon MAXIFY iB4060 Online Manual

Also see for MAXIFY iB4040: Manual Manual

For Two-Sided, select either Long-Edge binding or Short-Edge binding.4. Select Margin from the pop-up menu on the Print Dialog5. Set the stapling marginIf necessary, set the Margin width, and to change the Stapling Side, select a setting from the list.Note• Depending on the Two-Sided setting in the Layout pop-up menu, the Stapling Side that can beselected differs.6. Complete the setupClick Print.When you execute print, duplex printing will be started.Important• When a media type other than Plain Paper is selected from Media Type menu of Quality & Media,duplex printing cannot be executed.• Duplex printing can be performed only when one of the following paper sizes is selected from PaperSize.• US Letter, A4• After printing the front page, there is an ink drying wait time before starting to print the back page(Operation stops temporarily). Do not touch the paper during this time. You can change the ink dryingwait time from Custom Settings in the Canon IJ Printer Utility.Note• When you use duplex printing, the print area becomes slightly smaller than the normal print area.Related TopicChanging the Printer Operation Mode286