Canon MAXIFY iB4060 Online Manual

Also see for MAXIFY iB4040: Manual Manual

Cannot Detect the Printer during Wired LAN Setup: Check 1Is the LAN cable connected, and are the printer and the router turned on?Make sure that the LAN cable is connected.Make sure that the printer is turned on.Confirming that the Power Is OnMake sure that the router is turned on.If the LAN cable is connected and the printer or the network device isturned off:Turn on the printer or the network device.After turning on the printer or the network device, it may take some time until ready for use. After a whilejust turning on the printer or the network device, click Redetect on the Check Printer Settings screen.When the printer is detected, follow the instructions on the screen to continue to set up the networkcommunication.If the LAN cable is connected and the printer and the network device areturned on:If the printer could not be detected after clicking Redetect even when the printer and the network deviceare turned on, or when you have turned them on, go to check 2.Cannot Detect the Printer during Wired LAN Setup: Check 2352