| 
6-5Reports and Lists6Adjusting the RX REPORT SettingThe machine can print an RX (reception) report after receiving a document. You can set it to print everytime it receives a document, or only when an error occurs. Alternatively, you can disable printing thereport. By default, the machine is set not to print an RX REPORT.1 Press [Menu].2 Press [ (-)] or [ (+)] to select ➞ press [OK].3 Press [ (-)] or [ (+)] to select ➞ press [OK].4 Press [ (-)] or [ (+)] to select ➞ press [OK].5 Press [ (-)] or [ (+)] to select the setting you want ➞ press [OK].You can select from the following:- - to print a report only when a reception error occurs- 6 Press [Stop/Reset] to return to the standby display.********************************************* ***R X R E P O RTRECEPTION OKTX/RX NO 5003RECIPIENT ADDRESS 905 795 1111DESTINATION IDST. TIME 01/02 17:52TIME USE 00' 1 4PGS. 1RESULT OK01/02 2005 17:52 FAX 1234567 CANON 001OK: Reception successfulNG: Some or no pages receivedNumber of pages received.If reception was not complete, itindicates the number of page beingreceived when an error occurred.Reception durationReception timeRegistered name for speed dial(not mentioned on the RX report)Senders fax/telephone numberTransaction numberDescription |
