Canon MF5750 Facsimile Manual

Also see for imageCLASS MF5770: Facsimile guide Basic guide User manual Basic guide Remote ui guide

Contents

8-2Machine Settings82. USER SETTINGS The basic operation settings in the Fax mode can bespecified.1. TEL LINE SETTINGS Specifies the telephone line settings.1. UNIT TEL NUMBER Your fax/telephone number can be registered within 20digits, including spaces. (See "Registering Your Fax/Telephone Number and Name," on p. 2-2.)2. TEL LINE TYPE Selects the telephone line type. (See "Setting theTelephone Line Type," on p. 2-3.)TOUCH TONE The telephone line is set for touch tone dialing.ROTARY PULSE The telephone line is set for rotary pulse dialing.3. TX START SPEED Sets the transmission speed for all documents yousend.33600bps/14400bps/9600bps/7200bps/4800bps/2400bps4. RX START SPEED Sets the transmission speed for all documents youreceive.33600bps/14400bps/9600bps/7200bps/4800bps/2400bps2. UNIT NAME You can register your name or your company namewithin 24 characters, including spaces. (See"Registering Your Fax/Telephone Number and Name,"on p. 2-2.)3. TX TERMINAL ID Sets the options for the sender Information.ON Sender information will be printed in small type at thetop of each page.1. TTI POSITION Selects whether the sender Information is positionedinside or outside the image area.OUTSIDE IMAGE: Terminal ID is printed outside theimage border.INSIDE IMAGE: Terminal ID is printed inside the imageborder.2. TEL NUMBER MARK You can prefix your number with the abbreviations FAXor TEL in your sender information.OFF Sender information will not be printed.4. OFFHOOK ALARM Enables/disables the offhook alarm that alerts you whenthe handset is not in the handset cradle.ON The offhook alarm sounds when the handset ofextension telephone is left off the hook.OFF No offhook alarm.5. R-KEY SETTING The R-KEY setting allows you to set how the faxconnects to PBX. If your fax machine is not connectedthrough a PBX, you can ignore these settings.PSTN The fax is connected to the outside line.PBX The fax is connected through a PBX. Select one of thefollowing settings, depending on the type of PBX inservice. Two settings are available: HOOKING, PREFIXName Descriptions