Changing the Machine Operation ModeIf necessary, switch between various modes of machine operation.The procedure for configuring Custom Settings is as follows:Custom Settings1. Open the printer driver setup window2. Make sure that the machine is on, and then click Custom Settings onthe Maintenance tabThe Custom Settings dialog box opens.NoteIf the machine is off or if communication between the machine and the computeris disabled, an error message may appear because the computer cannot collectthe machine status.If this happens, click OK to display the most recent settings specified on yourcomputer.3. If necessary, complete the following settings:Prevent paper abrasionThe machine can increase the gap between the print head and the paper during high-density printing to prevent paper abrasion.Check this check box to prevent paper abrasion.Align heads manuallyUsually, the Print Head Alignment function on the Maintenance tab is set toautomatic head alignment, but you can change it to manual head alignment.If the printing results are unsatisfactory even after you execute automatic headalignment, execute manual head alignment.Check this check box to perform the manual head alignment. Uncheck this check boxto perform the automatic head alignment.Prevent paper double-feedSelect this check box only if the machine is feeding multiple sheets of plain paper atthe same time.143
