ImportantUsing this function slows down the print speed.Rotate 90 degrees left when orientation is [Landscape]On the Page Setup tab, you can change the rotation direction of the Landscape inthe Orientation.To rotate the print data 90 degrees to the left during printing, select this item. Torotate the print data 90 degrees to the right during printing, clear this item.ImportantDo not change this setting while the print job is displayed in the print wait list.Otherwise, characters may be omitted or the layout may become corrupt.Detect the paper width when printing from computerWhen you print from the computer, this function identifies the paper that was loadedinto this machine.When the paper width detected by the machine differ from the width of the paperspecified in Page Size on the Page Setup tab, a message is displayed.To use paper width detection when printing from the computer, select the check box.ImportantIf you are using user-defined paper, use the Custom Paper Size to correctly setthe size of the paper loaded in the machine.If an error message is displayed even though the same size that was set isloaded, clear the check box.Ink Drying Wait TimeYou can set the length of the machine rest time until printing of the next page begins.Moving the slider to the right increases the pause time, and moving the slider to theleft decreases the time.If the paper gets stained because the next page is ejected before the ink on theprinted page dries, increase the ink drying wait time.Reducing the ink drying wait time speeds up printing.4. Apply the settingsClick OK and when the confirmation message appears, click OK.The machine operates with the modified settings hereafter.144
