Do not useSelect to disable encryption.Use WEPTransmission is encrypted using a WEP key you specified.If a WEP key has not been set, the WEP Details screen is displayed automatically. To change WEPsettings set before, click Configuration... to display the screen.Changing the WEP Detailed SettingsUse WPA/Use WPA2Transmission is encrypted using a WPA or WPA2 key you specified.The security has been strengthened more than WEP.If a WPA or WPA2 key has not been set, the Authentication Type Confirmation screen is displayedautomatically. To change WPA or WPA2 settings set before, click Configuration... to display theWPA Details screen or WPA2 Details screen.Changing the WPA or WPA2 Detailed Settings5. Configuration...The detailed settings screen is displayed. The WEP, the WPA, or the WPA2 key selected in EncryptionMethod: can be confirmed and changed.For details on WEP setting:Changing the WEP Detailed SettingsFor details on WPA or WPA2 setting:Changing the WPA or WPA2 Detailed Settings6. TCP/IP Setup:Sets the IP address of the printer to be used over the LAN. Set a value appropriate for your networkenvironment.Get IP address automaticallySelect this option to use an IP address automatically assigned by a DHCP server. DHCP serverfunctionality must be enabled on your wireless LAN router or access point.Use next IP addressIf no DHCP server functionality is available in your setup where you use the printer or you want touse a particular IP address, select this option to use a fixed IP address.179
