140TroubleshootingIf you have a problem with your camcorder, refer to this checklist. Consult your dealeror a Canon Service Centre if the problem persists.Power SourceRecording/PlaybackCamcorder is not turned on.Cassette is not loaded.Cassette is not loaded.Battery pack is exhausted.Condensation is detected.Camcorder stoppedoperating to protect thetape.Camcorder and wirelesscontroller are not set to thesame remote sensor mode.Batteries of the wirelesscontroller are exhausted.Turn on the camcorder.Load a cassette.Load a cassette.Replace or charge thebattery pack.See reference page.Unload and reload thecassette.Change the remote sensormodes.Replace the batteries.Buttons will not work.v flashes on the screen.k flashes on thescreen.h flashes on the screen.“Remove the cassette”appears on the screen.The wireless controllerwill not work.22141411138147618Problem Cause SolutionBattery pack is exhausted.Battery pack is not correctlyattached.Battery pack is exhausted.Power save function hasbeen activated.Battery pack is exhausted.Cassette compartment coveris not fully open.Battery pack is exhausted.The camcordermalfunctions.Battery pack is exhausted.Replace or charge thebattery pack.Attach the battery packcorrectly.Replace or charge thebattery pack.Turn on the camcorder.Replace or charge thebattery pack.Open the cassettecompartment cover fully.Replace or charge thebattery pack.Consult a Canon ServiceCentre.Replace or charge thebattery pack.Camcorder will not turnon.The camcorder switchesoff by itself.Cassette compartmentwill not open.Cassette compartmentstopped during loading/unloading.LCD/viewfinder switcheson and off.11111123111411–11
