59Advanced Functions -RecordingEAudio RecordingChanging the Audio ModeYou can record sound in two audio modes—16-bit and 12-bit. The 12-bit mode recordssound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding newsound later. Select the 16-bit mode for higher sound quality.Open the menu and select [AUDIO SETUP]. Select [AUDIO MODE], set it to[16bit] and close the menu.“16bit” appears for approximately 4 seconds.Wind ScreenYou can reduce the wind noise when recording in windy places.Open the menu and select [AUDIO SETUP]. Select [WIND SCREEN], set it to[ON] and close the menu.“WS O” appears when you turn the wind screen on.❍ Low sound may be reduced together with the wind noise. We recommendturning off the wind screen for normal recordings.❍ The wind screen function can also be used for audio dubbing(when [AUDIO DUB.] is set to [MIC. IN] in the [AUDIO SETUP] submenu).CARD PLAYCARD CAMERAPLAY (VCR)CAMERACARD PLAYCARD CAMERAPLAY (VCR)CAMERAAUDIO MODE•••12bitAUDIO SETUP( 38)* MV750i/MV730i/MV700i only.** MV750i/MV730i only.*WIND SCREEN••OFFAUDIO SETUP( 38)
