86Replacing Existing Scenes (AV Insert)You can insert and replace images and audio on the tape of the camcorder withimages and audio from other video devices connected via AV terminal or DV terminal.This function is operated with the wireless controller.1. Connect the camcorder to a video device.See Playing Back on a TV Screen ( 34).2. Connected device: Load a recorded cassette. Locate the scene you wishto insert and pause playback shortly before the scene.3. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.Use a tape recorded in SP mode and make sure that the tape-protect switch is set toallow recording.4. Locate the scene you wish to replace and pause playback shortly beforethe scene.5. Press the AV INSERT button on the wirelesscontroller.“AV INSERT” and “2a” appear.CARD PLAYCARD CAMERAPLAY (VCR)CAMERAPlayback tapeTape in thecamcorderbefore insertingTape in thecamcorder afterinsertingScene to be insertedInsert start Insert endInserted scenePAUSEAV INSERT AV DV REMOTE SETSLOW 2STOPRECPAUSE12bitAUDIO OUTAUDIO DUB.
