101EUsing a Memory CardPlaying Back a Memory CardYou can display a single image, 6 at one time (index screen 102), or one after another(slide show 102). Use the Card Jump function to quickly locate an image withoutdisplaying them one by one ( 102).1. Set the camcorder to CARD PLAY mode.2. Press the CARD +/– button to move between images.3. To play back a movie, press the / button.• The first scene appears as a still image when playback iscomplete.• Pressing the / button during playback pauses theplayback. Press the / button again to restart playback.• Pressing the button displays the first scene of the movie.• Press the CARD +/– button (or the REW /FF button on the wirelesscontroller) for 8x fast forward/fast rewind playback. Images not recorded with this camcorder, uploaded from a computer (exceptthe sample images 108), edited on a computer and images whose filenames have been changed may not be played back correctly. Do not turn off the camcorder, change the position of the TAPE/CARD switch,disconnect the power source, open the memory card cover or remove thememory card while the card access indicator is flashing. Doing so could resultin data damage.CAMERA PLAY (VCR) CARD CAMERA CARD PLAY/ buttonbuttonSLIDE SHOW buttonCARD + buttonCARD – button
