18Using the Wireless ControllerPoint it at the camcorder’s remotesensor when you press the buttons.Inserting the BatteryThe wireless controller operates with a lithium button battery CR2025.1. Pull out the battery holder.2. Place the lithium button batterywith the + side facing up.3. Insert the battery holder. The wireless controller may not work properly when the remote sensor issubjected to strong light sources or direct sunlight. If the wireless controller does not work, check if the remote sensor is set to[OFF ] ( 74 ). When the camcorder cannot be operated with the wireless controller, or when itcan only be operated in very close range, replace the battery.
