96Recording Movies on a Memory CardYou can record Motion JPEG movies with the camcorder, from a tape in the camcorder orfrom devices connected via the DV terminal or the AV terminal. The sound of a movierecorded on a memory card will be monaural.1. Press the start/stop button to begin recording.With SD Memory Cards up to 512 MB, you can record until“CARD FULL” appears (approx. 33 minutes with a 512 MB SDMemory Card). With MultiMediaCards, the recording time islimited to 10 sec. in 320 x 240 pixels and 30 sec. in 160 x 120pixels.2. Press the start/stop button to stop recording. Do not turn off the camcorder, change the position of the TAPE/CARD switch,disconnect the power source, open the memory card cover or remove thememory card while the card access indicator is flashing. Doing so could resultin data damage. When you are using a SD Memory Card, make sure that the protect switch isset to allow recording. Do not load/unload a cassette during recording. We recommend using a Canon SD Memory Card, or a SD Memory Card with atransfer rate of more than 2 MB/sec., right after you have formatted it with thiscamcorder. With memory cards not formatted with this camcorder, or whenrecording/erasing has been repeatedly performed, the writing speed may belower and recording may stop. You can select the focusing point when recording a movie on the memory card. Users of Windows XP: When you plan to connect the camcorder to a computer,keep the length of one movie shorter than approx. 12 min. in 320 x 240 and 35min. in 160 x 120.Recording from a Tape in the Camcorder1. Play back the tape.2. Press the start/stop button when the scene you wish to recordappears.3. Press the start/stop button to stop recording.CAMERA PLAY (VCR) CARD CAMERA CARD PLAYCAMERA PLAY (VCR) CARD CAMERA CARD PLAYPLAY (VCR)OFFCAMERAPOWER
