107EEditingRecording the Input Video on a Memory CardThe size of the still image recorded on the memory card will be 640 x 480. The still imagequality and the movie size can be selected.1. Set the camcorder to PLAY (VCR) mode.If a cassette is loaded, make sure that the tape is stopped.2. Press the MENU button and select [VCR SETUP]. Select [AV DV/ ](MVX45i) or [AV DV] (MVX40i), set it to [ON] and press the MENUbutton.3. Selecting the still image quality:Press the FUNC. button. Select the still image quality symbol followedby a setting option and press the FUNC. button.Selecting the movie size:Press the FUNC. button. Select the movie size symbol followed by asetting option and press the FUNC. menu.4. Connected device: Load a recorded cassette and play back the tape.When recording a still image:5. Press the PHOTO button halfway when the scene you wish to recordappears.• The still image, remaining image capacity and other information appear.• When you press the PHOTO button on the wireless controller, recording startsimmediately.6. Press the PHOTO button fully.The card access indicator flashes.When recording a movie:5. Press the start/stop button when the scene you wish to recordappears.Pressing the start/stop button again stops recording. Headphones cannot be used during analog line-in recording. When connecting to a TV/Video with SCART terminal, use a SCART adapterwith input capability (commercially available). The supplied SCART AdapterPC-A10 is for output only. Depending on the signal sent from the connected device, dubbing may not workproperly (e.g. signals that include copyright protective signals or anomaloussignals such as ghost signals). We recommend powering the camcorder from a household power source. An image recorded from an image in widescreen mode will be verticallycompressed. The data code of the still image will reflect the date and time it has beenrecorded on the memory card.CAMERA PLAY (VCR) CARD CAMERA CARD PLAYDownloaded From VideoCamera-Manual.com Manuals
