138Memory Card OperationPrintingEditingThe tape stops duringplayback pause.When playback pause continues for more than 4 minutes 30seconds during playback or audio dubbing, the camcordershuts off to protect tape and video heads. Playback the tapeagain and press the / pause button.–Problem SolutionMemory card cannot beinserted.Memory card was not facing the correct direction. Turn thememory card over and reinsert it.20Memory card cannot berecorded.Insert a memory card. 20Memory card is full. Replace the memory card or eraseimages.103Format the memory card. 104File number reached maximum value. Set [FILE NOS.] to[RESET] and insert a new memory card.72SD Memory Card is protected. Change the position of theprotect switch.20Memory card cannot beplayed back.Set the camcorder to CARD PLAY mode. 39Insert a memory card. 20Image cannot be erased. Image is protected. Cancel the protection. 102SD memory card is protected. Change the position of theprotect switch.20“ ” flashes red. Card error occurred. Turn off the camcorder. Remove andreinsert the memory card. Format the memory card if flashingpersists.104Problem SolutionThe printer is not operatingeven though camcorder andprinter are correctlyconnected.1. Set the camcorder to CARD PLAY mode.2. Disconnect and reconnect the USB cable.3. Turn off the printer and turn it back on.–Problem SolutionDubbing via the camcorder’sDV terminal does not work.Set [AV DV/ ] (MVX45i) or [AV DV] (MVX40i) to [OFF]. 72Wrong signal format. Dubbing may work via the AV terminal.Refer also to the instruction manual of the connected device.–Problem SolutionDownloaded From VideoCamera-Manual.com Manuals
