Canon MX450 series Online Manual

Also see for MX450 series: Setup manual Setup guide Online manual Online manual Online manual

Contents

• ScannersThe Bonjour service names or MAC addresses of the scanners or printers that can be used over thenetwork are displayed.You can select up to three scanners and printers in total at the same time. Selecting a scanner orprinter automatically enables scanning from the operation panel.ImportantIf you have disabled Bonjour after selecting your scanner or printer by Bonjour service name,reopen the Scan-from-PC Settings screen and select the MAC address of your scanner or printerfrom Scanners.If you have changed the Bonjour service name after selecting your scanner or printer by Bonjourservice name, reopen the Scan-from-PC Settings screen and select the new Bonjour servicename from Scanners.NoteIf the Bonjour service name or MAC address of your scanner or printer is displayed in gray or notdisplayed, or cannot be selected, check the following conditions and click OK to close the screen, thenreopen it and select your scanner or printer.ScanGear (scanner driver) is installedNetwork settings of your scanner or printer is completed after installing ScanGearNetwork communication between your scanner or printer and computer is enabledIf your scanner or printer still does not appear, see "Problems with Network Communication" for yourmodel from Home of the Online Manual.You do not need to use this software when scanning via USB. If you do not want to start IJ NetworkScanner Selector EX upon login, see "About IJ Network Scanner Selector EX." You can scan via USBeven if it is running.