Canon MX450 series Online Manual

Also see for MX450 series: Setup manual Setup guide Online manual Online manual Online manual

Contents

If you select Search again, the machine starts searching for the connected computersagain.When you forward the scanned data to the computer using WSD (one of the networkprotocols supported in Windows 7 and Windows Vista), select Active for WSD scan fromdev. on WSD setting on Other settings in LAN settings under Device settings.6. Make sure that Document type is selected, then press the OK button.7. Use the button to select the document type, then press the OK button.NoteWhen you forward the scanned data to the computer searched using WSD, you cannotselect the document type.The * (asterisk) on the LCD indicates the current setting.Auto scanThis item is available only when the machine is connected to the computer using a USB cable.The machine detects the type of the originals automatically and the image is forwarded in theoptimized size, resolution and data format.ImportantYou can select Auto scan only when you forward the scanned data to the USB-connectedcomputer.Load originals properly according to their type; otherwise, some originals may not bescanned properly.For details on how to load the original:Loading OriginalsThe following items can be scanned:Photos, postcards, visiting cards, magazines, newspapers, documents, BD/DVD/CDsThe following items cannot be scanned properly.A4 sized photosDocuments smaller than 5 inches x 7 inches (127 mm x 178 mm) such as a paperbackwith its backbone cut offOriginals on thin white paperLong and narrow originals such as panoramic photographsWhen you scan originals from the ADF, it may take longer to scan the first page.DocumentScans the original on the platen glass or in the ADF applying the optimized settings for scanning adocument.PhotoScans the original on the platen glass as a photo data applying the optimized settings forscanning a photo.8. Specify the scan settings.Specify each scan setting in order.NoteFor details on each setting item:Setting Items on the Operation Panel of the MachineGo to step 9 when Auto scan is selected for Document type.1. Make sure that Scan size is selected, then press the OK button.2. Use the button to select the scan size, then press the OK button.3. Make sure that Data format is selected, then press the OK button.4. Use the button to select the data format, then press the OK button.5. Make sure that Scan resolution is selected, then press the OK button.6. Use the button to select the scan resolution, then press the OK button.The Scan standby screen is displayed after all the settings have been specified.