No matter how you use to set the quiet mode, the mode is applied when you perform operationsfrom the operation panel of the machine or printing and scanning from the computer.Custom Settings dialog boxWhen you click Custom Settings, the Custom Settings dialog box is displayed.If necessary, switch between various modes of machine operation.Prevent paper abrasionThe printer can increase the gap between the print head and the paper during high-density printing toprevent paper abrasion.Check this check box to enable this function.Align heads manuallyUsually, the Print Head Alignment function on the Maintenance tab is set to automatic headalignment, but you can change it to manual head alignment.If the printing results are unsatisfactory even after you execute automatic head alignment, executemanual head alignment.Check this check box to perform the manual head alignment.Prevent paper double-feedSelect this check box only if the machine is feeding multiple sheets of plain paper at the same time.Important• Using this function slows down the print speed.Rotate 90 degrees left when orientation is [Landscape]On the Page Setup tab, you can change the rotation direction of the Landscape in the Orientation.To rotate the document 90 degrees to the left when printing, select the check box.Detect the paper width when printing from computerWhen you print from the computer, this function identifies the paper that was loaded into thismachine.When the paper width detected by the machine differs from the width of the paper specified in PageSize on the Page Setup tab, a message is displayed.To use paper width detection when printing from the computer, select the check box.Important• If you are using user-defined paper, use the Custom Paper Size to correctly set the size of thepaper loaded in the machine.If an error message is displayed even though the same size that was set is loaded, clear thecheck box.Ink Drying Wait TimeThe machine can pause before printing a subsequent page. Moving the slider to the right increasesthe pause time, and moving the slider to the left decreases the time.If the paper gets stained because the next page is ejected before the ink on the printed page dries,increase the ink drying wait time.Reducing the ink drying wait time speeds up printing.123Downloaded from ManualsPrinter.com Manuals
