Security settings Screen• EnableSelecting Enable allows you to choose either of the security modes below.◦ Mode 3 (recommend)This mode is activated on link level enforced security.The passkey will be required when a Bluetooth device communicates with the printer. Normallyselect this mode.◦ Mode 2This mode is activated on service level enforced security.The passkey will be required when printing through the Bluetooth communication.After setting the security mode, we recommend making a trial print through Bluetooth communication.If printing does not start, change the security mode and try again.Setting a passkey will prevent unwanted access from other Bluetooth devices. You can change thepasskey on the Passkey screen.• Disable (Default setting)When you register the printer, you are not required to input a passkey.Passkey ScreenWhen you select Enable on the Security settings screen, you are required to set a passkey to registerthe printer on other Bluetooth devices.After you change the passkey, you may be asked to input the passkey on the Bluetooth devices you wereable to print from before the passkey was changed. In this case, input the new passkey.182Downloaded from ManualsPrinter.com Manuals
