Canon MX700 Service Manual

Also see for PIXMA MX700 Series: Supplementary guide Brochure & specs Cleaning guide Network Setup Guide Quick start guide

Contents

(7) Ink absorber replacement1) At the time of an error indicating that the ink absorber is full, replace either the main or the borderless-print ink absorber accordingto the error message.- When the main ink absorber is full:Replace the absorber indicated by the blue frame in the photo below (component of QY5-0192).- When the borderless-print ink absorber is full:Replace 2 absorbers in the red circle in the photo below and the platen ink absorber (components of QY5-0192).The main ink absorber and the borderless-print ink absorber have separate counters respectively. After ink absorber replacement,reset the applicable ink absorber counter according to the replaced ink absorber. For details, see (8) Ink absorber counter setting.2) Partial replacement of the main ink absorberFor the main ink absorber, the following replacement methods are available:After ink absorber replacement, set the ink absorber counter value according to the replacement method.See (8) Ink absorber counter setting, for details.Remove the rear cover (No. 1 in the photo) and the ink absorber cover (No. 2 in the photo) from the rear side of the machine, andreplace the portion of the main ink absorber (approx. 40%, No. 3 in the photo).(Time required: Approx. 4 min. including the operation check after replacement)MX700 TABLE OF CONTENTSReplacement method Difficulties Ink absorber volume to be replaced Print yield after replacementPartial replacement Low Approx. 40% of the entire main ink absorber Approx. 8,000 pagesWhole replacement High The entire main ink absorber Approx. 20,000 pages29 / 41