(2) Periodic maintenanceNo periodic maintenance is necessary.(3) Periodic replacement partsThere are no parts in this machine that require periodic replacement by a service engineer.(4) Replacement consumablesThere are no consumables that require replacement by a service engineer.1-2. Customer MaintenanceThe screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit.Adjustment Timing Purpose Tool Approx.timePrint headalignmentAt print head replacement To ensure accurate dotplacement.- Machine buttons- Computer (MP driver)3 min.(Manual)Print head cleaning When print quality is not satisfying. To improve nozzleconditions.- Machine buttons- Computer (MP driver)1 min.Print head deepcleaningWhen print quality is not satisfying, and notimproved by print head cleaning.To improve nozzleconditions.- Machine buttons- Computer (MP driver)2 min.Ink tankreplacementWhen an ink tank becomes empty. ("No inkerror" displayed on the monitor or on themachine LCD, or short flashing of an inktank LED)To replace the emptyink tank.--- 1 min.Rear tray paperfeed rollercleaning- When paper does not feed properly.- When the front side of the paper is smeared.To clean the paperfeed rollers.- Machine buttons- Computer (MP driver)2 min.Front tray paperfeed rollercleaning- When paper does not feed properly.- When the front side of the paper is smeared.To clean the paperfeed rollers.Manually clean theroller with a cottonswab.1 min.Bottom platecleaningWhen the back side of the paper is smeared. To clean the platenribs.- Machine buttons- Computer (MP driver)1 min.Scanning areacleaningWhen the platen glass or document pressuresheet is dirty.To clean the platenglass and documentpressure sheet.Soft, dry, and clean lint-free cloth.1 min.ADF cleaning When inside of the ADF cover is dirty To clean the inside ofthe ADF coverSoft, dry, and clean lint-free cloth.1 min.Exterior cleaning When necessary To clean the machineexteriorSoft, dry, and clean lint-free cloth (cloth forcleaning glasses, etc.)1 min.2 / 41