Checking the Device Name of the PrinterThis section describes the procedures for checking the settings of the Bluetooth unit on the LCD of theprinter in preparation for Bluetooth printing.Canon IJ printers with the Bluetooth interface are divided into two types. One is equipped with a graphicLCD, and the other with a text LCD.If you need more information about the Bluetooth settings, see Setting Bluetooth Printing.1. Make sure that the printer is turned on.Confirming that the Power Is On2. Attach the Bluetooth unit.For information about how to attach the Bluetooth unit, see Attaching to and Removing from thePrinter.3. Display the Bluetooth settings (Graphic LCD)/Bluetooth settings (Text LCD)screen on the LCD.For information about how to display the Bluetooth settings (Graphic LCD)/Bluetooth settings (TextLCD) screen, refer to Changing the Machine Settings on the LCD.Graphic LCDText LCDNoteIf the Bluetooth settings (Graphic LCD)/Bluetooth settings (Text LCD) screen is not displayedon the LCD, the Bluetooth unit may not be attached correctly. Remove the Bluetooth unit from theprinter and attach it once again.For details, see Attaching to and Removing from the Printer.If the Bluetooth settings (Graphic LCD)/Bluetooth settings (Text LCD) screen is not yetdisplayed, the Bluetooth unit may be faulty. In this case, contact the service center.4. Select Select device name (Graphic LCD)/Device name (Text LCD).The Select device name (Graphic LCD)/Device name (Text LCD) screen is displayed.
