Canon MX720 Series Online Manual

Also see for MX520 series: Setup guide Online manual Fax guide Online manual Online manual

Contents

4. Adjust the amount of extension from the paperIf necessary, adjust the amount of extension using the Amount of Extension slider.Moving the slider to the right increases the amount extending off the paper, and moving the slider tothe left decreases the amount.It is recommended to set the slider at the second position from the right for most cases.ImportantWhen the Amount of Extension slider is set to the rightmost position, the back side of thepaper may become smudged.5. Complete the setupClick OK.When you execute print, the data is printed without any margins on the paper.ImportantWhen a page size that cannot be used for borderless printing is selected, the size is automaticallychanged to the valid page sizes for borderless printing.When Borderless is selected, the Printer Paper Size, Duplex Printing, Stapling Side settings, andthe Stamp/Background... (Stamp...) button on the Page Setup tab appear grayed out and areunavailable.When Envelope, High Resolution Paper, or T-Shirt Transfers is selected from the Media Type liston the Main tab, you cannot perform borderless printing.Depending on the type of the media used during borderless printing, the print quality may deteriorateat the top and bottom of the sheet or stains may form.When the ratio of the height to the width differs from the image data, a portion of the image may notbe printed depending on the size of the media used.In this case, crop the image data with an application software according to the paper size.NoteWhen Plain Paper is selected for Media Type on the Main tab, borderless printing is notrecommended. Therefore, the message for media selection appears.When you are using plain paper for test printing, select Plain Paper, and click OK.Expanding the Range of the Document to PrintSetting a large amount of extension allows you to perform borderless printing with no problems. However,the portion of the document extending off the paper range will not be printed and for this reason, thesubjects around the perimeter of a photo may not be printed.Try borderless printing once. When you are not satisfied with the result of borderless printing, reduce theamount of extension. The extension amount decreases as the Amount of Extension slider is moved to theleft.ImportantWhen the amount of extension is decreased, an unexpected margin may be produced on the print,depending on the size of the paper.NoteWhen the Amount of Extension slider is set to the leftmost position, image data will be printed inthe full size. If you set this when printing the address side of a postcard, the postal code of the senderis printed in the correct position.When Preview before printing is checked on the Main tab, you can confirm whether there will beno border before printing.