Canon Optura 600 Instruction Manual

Contents

Canon Optura 600 Instruction Manual Manual pdf 130 page image

130List of MessagesMemory Card Related MessagesMessage ExplanationSET THE TIME ZONE,DATE AND TIMEYou have not set the time zone, date and time. This messageappears each time you turn the power on until you set the timezone, date and time.26CHANGE THE BATTERYPACKBattery pack is exhausted. Replace or charge the battery pack. 17THE TAPE IS SET FORERASURE PREVENTIONCassette is protected. Replace the cassette or change theposition of the protect switch.134REMOVE THECASSETTECamcorder stopped operating to protect the tape. Unload andreload the cassette.20CHECK THE INPUT DV cable or USB cable is not connected, or the connected digitaldevice is turned off.100119CONDENSATION HASBEEN DETECTEDCondensation has been detected in the camcorder. 129CONDENSATION HASBEEN DETECTEDREMOVE THECASSETTECondensation has been detected in the camcorder. Unload thecassette.129TAPE END Tape reached the end. Rewind the tape or replace the cassette. –CHECK THE CASSETTE[WRONG FORMAT]You attempted to perform audio dubbing on a tape recorded inHDV format.–WRONG FORMATPLAYBACK NOTPOSSIBLEYou attempted to play back a tape recorded in HDV format. –CHECK THE CASSETTE[REC MODE]You attempted to perform audio dubbing on a tape recorded in amode other than the SP mode.104CHECK THE CASSETTE[AUDIO MODE]You attempted to perform audio dubbing on a tape recorded in 16-bit or 12-bit 4-channel sound.104CHECK THE CASSETTE[BLANK]You attempted to perform audio dubbing on a tape with a blanksection.104HEADS DIRTY, USECLEANING CASSETTEVideo heads are dirty. Clean the video heads. 137COPYRIGHT PROTECTEDPLAYBACK IS RESTRICTEDYou attempted to play back a copyright protected tape. 101COPYRIGHTPROTECTED DUBBINGRESTRICTEDYou attempted to dub a copyright protected tape. May also appearwhen an anomalous signal is received during analog line-inrecording.101Message ExplanationNO CARD Memory card not is inserted into the camcorder. 21THE CARD IS SET FORERASURE PREVENTIONSD Memory Card is set for erasure prevention. Replace the cardor change the position of the protect switch.21NO IMAGES No images are recorded on the memory card. –CARD ERROR A memory card error occurred. The camcorder cannot record orplay back the image.The error may be temporary. If the message disappears after 4seconds an “ ” flashes red, turn the camcorder off, remove thecard and reinsert the card. If “ ” changes to green, you cancontinue recording/playback.–