39Basic FunctionsPlaybackEPlaying Back on a TV ScreenRefer also to the TV or VCR instruction manual.1. Turn off all devices before starting the connections.2. Open the terminal cover and connect the camcorder to the TV/VCRusing the MTC-100 Multi Cable.• When connecting to a TV with an S (S1)-video input terminal: Connect the blackplug to the S-video terminal, the white plug to the white audio terminal L (left) andthe red plug to the red audio terminal R (right). Do not connect the yellow plug.• When connecting to a TV with Audio/Video terminals: Connect the white plug to thewhite audio terminal L (left), the red plug to the red audio terminal R (right) and theyellow plug to the yellow video terminal VIDEO.3. If connecting to a TV, set the input selector to VIDEO. If connecting toa VCR, set the input selector to LINE.4. Play back a tape ( 35) or a memory card ( 37). We recommend powering the camcorder from a household power source. The picture quality is higher when connecting to a TV with an S (S1) terminal.VIDEOS(S1)-VIDEOINPUTAUDIORLVIDEOINPUTAUDIORLMTC-100Multi Cable(Supplied)TVs with S (S1)-VideoInput TerminalTVs with Audio/VideoTerminalsSignal flow
