98Analog Line-in RecordingYou can input video from other analog devices (VCR, TV or camcorder) via the S-videoterminal or AV terminal, and record the input video on the tape in the camcorder. You canalso record the input video as a movie or still image on a memory card.ConnectingRefer also to the instruction manual of the connected device.You can also connect via the S-video terminal ( 39).Recording1. Set the camcorder to PLAY(VCR)• mode and load a blank cassette.2. Press the MENU button and select [VCR SETUP]. Select [VIDEOINPUT] followed by a setting option and press the MENU button.3. Connected device: Load the recorded cassette.4. Press the REC PAUSE button.In record pause mode and during recording, you can check the picture on the screen.5. Connected device: Play back the tape.6. Press the / button when the scene you wish to record appears.Recording starts.7. Press the button to stop recording.• Press the / button to pause recording.• Press the / button again to restart recording.8. Connected device: Stop playback.AUDIOVIDEORLSignal flowMTC-100 Multi Cable(Supplied)
