Canon Optura Pi Instruction Manual

Also see for Optura Pi: User guide Software starter guide Instruction manual Install guide Brochure

Contents

Canon Optura Pi Instruction Manual Manual pdf 29 page image

30EQuick OverviewConnections for Playback on a TV ScreenYou can connect the camera to a TV or VCR in order to play back yourrecordings. You will need to attach a power source to the camera ( 11).Power off all devices before starting the connections.• Use the S-150 S-video Cable to connect the S-video terminals. Use the STV-250N Stereo Video Cable to connect the AUDIO terminals. Connect the whiteplug to the white AUDIO terminal L (left). Connect the red plug to the redAUDIO terminal R (right). Do not connect the yellow plug.• Set the TV/VIDEO selector on the television to VIDEO.• If you are connecting the camera to a VCR, set the input selector on the VCR toLINE.VIDEOS(S1)-VIDEOINPUTAUDIOLRS-150 S-video CableSTV-250N Stereo Video CableA/V IN/OUTIN/OUTMICDC IN9.5VSIf your TV (or VCR) has an S (S1) -video input terminalSee your TV or VCR instruction manual for further details.For higher picture quality, we recommend playing back recordings on a TV withan S (S1) terminal. If you connect the camera to a TV with an S1 terminal or theVideo ID-1 system, recordings made in the 16:9 mode for wide screen TVs willautomatically play back in wide screen mode on the TV screen.#2_OPTURA Pi_E(07-33) 1/25/00 13:41 Page 30 (1,1)