Canon Optura Pi Instruction Manual

Also see for Optura Pi: User guide Software starter guide Instruction manual Install guide Brochure

Contents

Canon Optura Pi Instruction Manual Manual pdf 48 page image

49E Using the FullRange of FeaturesUsing the VL-3 Video Light (optional)1. Slide the Video Light onto the camcorder’s accessory shoe andtighten with the shoe lock.• Slide in the direction of the arrow on the bottom of the Video Light until itclicks securely into place.• Make sure that the light does not come disconnected when turning the shoelock.2. Turn the camcorder’s POWER switch to camera mode.3. Turn the Video Light’s power switch to AUTO or ON.• (Connection) appears in the display.• ON: The Video Light stays on.• AUTO: The Video Light turns on/off automatically according to the level ofbrightness of the shooting conditions.• When the Video Light is set to AUTO, it will not turn itself on/off duringexposure lock or while the camera is recording a still picture, even if thebrightness of the surroundings changes.Caution:• Be careful not to touch the bulb or the surrounding area during or immediatelyafter use; it becomes very hot. Keep the Video Light away from flammable orplastic materials.• Do not look directly at the bulb while the Video Light is on.• Never carry the camera holding the Video Light.CWhen recording in dark rooms, attach the Video Light to the camera’sadvanced accessory shoe. The Video Light is powered by the same power sourceas the camcorder.Also refer to the VL-3 Video Light instructions.Turn the camcorder’s power off before attaching/removing the Video Light.ONOFFAUTOLOCKLOCKLOCKLOCK113#3_OPTURA Pi_E(34-78) 1/25/00 13:42 Page 49 (1,1)