Canon PICTBRIDGE DC22 Instruction Manual

Also see for PICTBRIDGE DC22: Instruction manual User manual Instruction manual

Contents

Connecting to a Printer86Printing after Selecting the Print SettingsYou can select the number of copies andother settings for printing. The settingoptions vary depending on your printermodel.1 Press ( ).• The print setting menu appears.• Depending on the printer, themessage “BUSY.” may appear beforethe camcorder displays the printsetting menu.2 Select the print settings ( 86).3 Select ( , ) [PRINT] and press( ).• Printing starts. The print setting menudisappears when the printing iscompleted.• To continue printing, select ( )another still image.IMPORTANTThe following still images may not becorrectly printed with a PictBridge compatibleprinter.- Images created or changed on a computerand transferred to the memory card.- Images recorded with the camcorder butedited on a computer.- Images on the memory card whose file nameswere changed.- Images copied from the memory card to thedisc.- Images not recorded with this camcorder.Observe the following precautions duringprinting:- Do not turn off the camcorder or the printer.- Do not change the position of the /switch.- Do not disconnect the USB cable.- Do not remove the disc or memory card.If the message “BUSY.” does not disappear,disconnect the USB cable from both thecamcorder and the printer and then reconnectthem again.NOTESTo Cancel the Printing: Press ( ) whileprinting. A confirmation screen appears. Select[OK] and press ( ). With Canon’s PictBridgecompatible printers, the printing will stopimmediately (even if not completed) and thepaper will be fed through.Printing Errors: If an error occurs while printing,an error message appears ( 97).- Canon’s PictBridge compatible printers:Resolve the error. When printing does notresume automatically, select [CONTINUE] andpress ( ). If [CONTINUE] cannot be selected,select [STOP], press ( ) and retry printing.Refer also to the printer’s instruction manual fordetails.- If the error still persists and printing does notrestart, disconnect the USB cable and turn thecamcorder off. Turn it on again, set it tomode and reconnect the cable.When you have finished printing: Disconnect thecable from the camcorder and printer and turnoff the camcorder.Print SettingsCurrent paper settings (paper size,paper type and page layout)Trimming settings ( 87)Date printingPrint effectNumber of copiesPaper settings