94 Trouble?Memory Card OperationPrintingList of MessagesProblem SolutionMemory card cannot beinserted.Memory card was not facing the correct direction. Turn thememory card over and reinsert it.24Memory card cannot berecorded.Memory card is full. Erase still images to free some space orreplace the memory card.67Memory card was not initialized. Initialize the memory card. 70The folder and file numbers have reached their maximum value.Set [FILE NOS.] to [RESET] and insert a new memory card.42Memory card cannot be playedback.Insert a memory card. 24Set the camcorder to . 35Make sure the memory card is selected as the media for stillimages.32Image cannot be erased. Image is protected. Cancel the protection. 69“ ” flashes in red. Card error occurred. Turn off the camcorder. Remove andreinsert the memory card. Initialize the memory card if flashingpersists.70Problem SolutionThe printer is not operatingeven though the camcorderand printer are correctlyconnected.1. Set the camcorder to .2. Disconnect and reconnect the USB cable.3. Turn off the printer and turn it back on.–Message ExplanationSET THE TIME ZONE,DATE AND TIMEYou have not set the time zone, date and time. This messageappears each time you turn the power on until you set the timezone, date and time.28CHANGE THE BATTERYPACKBattery pack is exhausted. Replace or charge the battery pack. 21TEMPERATURE TOOHIGH CANNOT RECORDThe camcorder has exceeded its operational temperature.Disconnect the compact power adapter and remove the battery andlet the camcorder cool down before resuming use.–TEMPERATURE TOOHIGH CANNOT REMOVEDISCCANNOT RECORDCHECK THE DISCThere is a problem with the disc. Replace the disc. 25This message can also appear if condensation has formed. Waituntil the camcorder dries completely before resuming use.102The disc’s recording surface may be dirty or scratched. –
