NO ANSWER The recipient's fax machine does not answer.Check the number. Try dialing again after waitingfor a moment.NO TONE DETECTED The telephone line cable with a modular plug isnot plugged in properly, or DIAL TONEDETECT is set to ON. Make sure that thecable is plugged in properly, and resend the faxafter a while. If you still cannot send the fax, setDIAL TONE DETECT to OFF.NO RX PAPER The other party's fax machine is out of paper orits memory is full.Contact the other party and have them loadpaper in their fax machine or free up space intheir fax machine's memory.NO TEL NUMBER The coded speed dialing code you entered hasnot been registered.Register the coded speed dialing code.RECEIVED INMEMORYIf the machine receives a fax under one of thefollowing conditions, the machine will not be ableto print the received fax and will store it in itsmemory.When the problem is resolved as described, thefax stored in memory is printed automatically.Ink is low or has run out while receiving afax: replace the FINE Cartridge. SeeReplacing a FINE Cartridge.Paper size/type setting is incorrect: correctthe paper size/type setting.Paper has run out while receiving a fax:load the paper and press the OK button.Output Tray is closed: open it.OFF is selected for AUTO PRINT RX:select ON.You pressed the Stop/Reset button tocancel printing of a fax: press the FAXbutton.TRY AGAIN IN B&W The recipient's fax machine is not color-compatible. Press the Black button to resendthe faxes.153
