(2) Open the Canon IJ Printer Utility.See Opening the Canon IJ Printer Utility (Macintosh).(3) Select Custom Settings in the pop-upmenu.(4) Drag the Ink Drying Wait Time slide bar toset the wait time, and then click Send.(5) Confirm the message and click OK.Printing ingrayscale orusing onlyblack ink.If you are printing using only black ink, try reducing theIntensity setting or increasing the Print Qualitysetting in the printer driver.When you are printing a monochrome document orotherwise printing in grayscale, stacking the printoutpaper may cause undried ink to stain the sheets.Reducing the Intensity setting or increasing the PrintQuality setting will help to prevent this.Printing oninappropriatetype of paper.Check to see if the paper you are printing on is nottoo thick or curled.See General Information.When performing Borderless Printing, print qualitymay be reduced at the top and bottom edges of thepaper. Make sure that the paper you are using issuitable for Borderless Printing.For details, see Printing Area.Paper iscurled.For Plain PaperTurn the paper over and reload it to print on the otherside.Leaving the paper loaded in the Rear Tray for a longtime may cause the paper to curl. If this happens, loadthe paper with the other side facing up. It may resolvethe problem.We recommend putting unused paper back into thepackage and keep them on a level surface.For Other PaperIf you are using paper with either any of the corners orthe whole printing surface curled, the paper may becomedirty, not feed properly, or both. Use such paper aftercorrecting paper curl as follows.(1) With the printing side (A) facing up, cover thepaper with a fresh sheet of plain paper to avoid171
