Canon PIXMA G3520 Online Manual

Also see for Pixma G3020 Series: Online manual Getting started Getting started

OrientationSelects the printing orientation.If the application used to create your document has a similar function, select the same orientation thatyou selected in that application.PortraitPrints the document so that its top and bottom positions are unchanged relative to the paper feeddirection. This is the default setting.LandscapePrints the document by rotating it 90 degrees relative to the paper feed direction.You can change the rotation direction by going to the Canon IJ Printer Assistant Tool, opening theCustom Settings dialog box, and then using Rotate 90 degrees left when orientation is[Landscape] check box.To rotate the document 90 degrees to the left when printing, select the Rotate 90 degrees leftwhen orientation is [Landscape] check box.Print QualitySelects your desired printing quality.Select one of the following to set the print quality level that is appropriate for the purpose.To set the print quality level individually, click the Main tab, and for Print Quality, select Custom. TheSet... becomes enabled. Click Set... to open the Custom dialog box, and then specify the desiredsettings.HighGives priority to print quality over printing speed.StandardPrints with average speed and quality.EconomyReduces the amount of black ink used when printing.Note• Selecting Economy reduces black ink consumption. This means that you can print more thanif you have Standard selected.When performing color printing or color copying, ink consumption for the black areas isreduced. However, for the color areas, the same amount of ink is consumed as the Standardsetting.For details on Economy Mode, see "Economy Mode."Paper SourceThe paper source of the media is being displayed.Rear TrayPaper is always supplied from the rear tray.CopiesSpecifies the number of copies you want to print. You can specify a value from 1 to 999.Important• When the application software that you used to create the document has the same function,specify the settings on the printer driver. However, if the print results are not acceptable, specifythe function settings on the application software.244