Canon PIXMA G3520 Online Manual

Also see for Pixma G3020 Series: Online manual Getting started Getting started

Note• After completing the settings, you can check the Network name(SSID), Security protocol, andWL Direct net.(SSID) by displaying them.• When displaying the Security protocol, a screen appears asking whether to display thepassword at the same time. To display the password, select Yes. To not display the password,select No.• The password is required when connecting a device to the printer. Depending on the device youare using, no password is required.• When you connect a Wi-Fi Direct compatible device to the printer, select the printer name fromyour device.• To change the identifier (SSID) and the password, see below.Changing Wireless Direct SettingConnecting a smartphone/tablet/computer to the printer1. Enable Wi-Fi function on smartphone/tablet/computer.Enable Wi-Fi in the Settings menu on your smartphone/tablet/computer.For instructions on enabling the Wi-Fi function, refer to the instruction manual for your smartphone/tablet/computer.2. Select "DIRECT-XXXX-G3020series" ("X" represents alphanumeric characters) from liston your smartphone/tablet/computer.Note• If "DIRECT-XXXX-G3020series" does not appear on the list, Wireless Direct is not enabled.See Changing Printer Setting to Use Wireless Direct to enable Wireless Direct.3. Enter Password on smartphone/tablet/computer.The smartphone/tablet/computer is connected to the printer.Note• Check the password for the Wireless Direct.Check by one of the following methods.Display on the LCD of the printer.LAN settingsPrint the network settings.Printing Network Settings• Depending on the device you are using, entering the password is required to connect a deviceto the printer via Wi-Fi. Enter the password specified for the printer.45