Canon PIXMA G3520 Online Manual

Also see for Pixma G3020 Series: Online manual Getting started Getting started

Refilling Ink TanksWhen remaining ink cautions or errors occur, the message will appear on the LCD to inform you of the error.In this state, the printer cannot print. Check the remaining ink level with the ink tank indicator on the front ofthe printer. If the ink level is near the lower limit line (A), refill the ink tank.Important• If the function for notifying the remaining ink level (remaining ink level notification function) is enabled,resetting the remaining ink level count is required before refilling ink tanks up to the upper limit line.If the remaining ink level count is reset when the ink tanks are not full, the printer cannot detect the inklevel correctly.From the printerInk level monitorFrom the computerChanging the remaining ink level notification setting• If the remaining ink level notification function is disabled, visually inspect the remaining ink and refill theink tanks as necessary. Continuing printing with ink below the lower limit line of an ink tank may preventsatisfactory print quality.Note• If print results become faint or white streaks appear despite sufficient ink levels, see MaintenanceProcedure.• For precautionary notes on handling ink bottles, see Notes on ink bottles.Refilling ProcedureWhen you refill ink tanks, follow the steps below.Important• Please ensure the printer remains flat after initial setup and is NOT turned upside down or on its side,as ink in the printer may leak.1. Check that printer is turned on.2. Open the scanning unit / cover (B).94